The unusual tribological behavior of diamond-like carbon films under high vacuum

We fabricate F-doped and F-S-codoped diamond-like carbon (DLC) films using plasma-enhanced chemical vapor deposition system. The hardness, Raman spectra, and high-vacuum tribological behaviors indicate that the films are DLC films. The hardness is close related to the tribological properties of DLC films under high vacuum. The high hardness of DLC films would be helpful for obtaining the long lifetime under high vacuum. The lifetimes of F-S-codoped DLC films are about 120 and 140 seconds, which is attributed to the fast graphitization under high vacuum. The lifetime of F-doped DLC films is prolonged to the value of around 300 and 440 seconds, X-ray photoelectron spectroscopy analysis exhibits the existence of the “adsorption” F, and transmission electron microscopy analysis shows that the “adsorption” F could react with Fe to form layered FeF₂ nanocrystal at the initial sliding, which could be helpful for prolonging the lifetime of F-doped DLC films under high vacuum. This investigation opens a new window to overcome the disadvantage of F, S-doped DLC films under high vacuum.     

Critical Assessment of the DFT + U Approach for the Prediction of Vanadium Dioxide Properties

In a previous study (Stahl and Bredow, Chem. Phys. Lett. 2018, 695, 28–33), we have studied structural, energetic, and electronic properties of two vanadium dioxide VO₂ polymorphs with modified global and range-separated hybrid functionals. Since hybrid methods are computationally demanding, we evaluate the computationally more efficient DFT + U method in the present study. We assessed the widely used Dudarev PBE + U approach with a literature value of the effective Hubbard parameter U_eff = 3.4 eV. We compared the PBE + U results for the two VO₂ polymorphs with our previous results, a self-consistent hybrid functional sc-PBE0, and the meta-GGA functional SCAN. It was found that the PBE + U method yields a strongly distorted monoclinic phase and does not reproduce the metal-to-insulator transition of VO₂ correctly, even with modified values of U_eff. On the other hand, sc-PBE0 and SCAN describe the relative stability and the electronic structure of both polymorphs correctly and also provide reasonable lattice parameters. The functional SCAN yields the optimal balance between computational efficiency and accuracy. © 2019 The Authors. Journal of Computational Chemistry published by Wiley Periodicals, Inc.     

Pyridinium-functionalized metalloporphyrins as bifunctional catalysts for cycloaddition of epoxides and carbon dioxide

New pyridinium-functionalized metalloporphyrins MEtPpBr₄ (M = Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺; EtPp = 5, 10, 15, 20-tetra(4-(3-(N-ethyl-4-pyridyl)pyrazolyl)phenyl)porphyrin) were synthesized as bifunctional catalysts for the cycloaddition reactions of epoxides and CO₂. The effects of catalyst loading, CO₂ pressure, reaction temperature and time on catalytic activity were investigated. ZnEtPpBr₄ ( 1 ) and CoEtPpBr₄ ( 2 ) exhibited efficient activities in the cycloaddition reactions of various epoxides with CO₂ as at 120 °C under 2 MPa of CO₂ pressure without solvent. Most of corresponding cyclic carbonates could be obtained in almost quantitative yields and > 99.9% selectivity with molar ratio of epoxide/catalyst 2222 after 8 hr of reaction.     

Carbon-Based Materials as Lithium Hosts for Lithium Batteries

Lithium (Li) metal has attracted significant attention in areas that range from basic research to various commercial applications due to its high theoretical specific capacity (3860 mA h g⁻¹) and low electrochemical potential (−3.04 vs. standard hydrogen electrode). However, dendrites often form on the surfaces of Li metal anodes during cycling and thus lead to battery failure and, in some cases, raise safety concerns. To overcome this problem, a variety of approaches that vary the electrolyte, membrane, and/or anode have been proposed. Among these efforts, the use of three-dimensional frameworks as Li hosts, which can homogenize and minimize the current density at the anode surface, is an effective approach to suppress the formation of Li dendrites. Herein, we describe the development of using carbon-based materials as Li hosts. While these materials can be fabricated into a variety of porous structures, they have a number of intrinsic advantages including low costs, high specific surface areas, high electrical conductivities, and wide electrochemical stabilities. After briefly summarizing the formation mechanisms of Li dendrites, various methods for controlling structural and surface chemistry will be described for different types of carbon-based materials from the viewpoint of improving their performance as Li hosts. Finally, we provide perspective on the future development of Li host materials needed to meet the requirements for their use in flexible and wearable devices and other contemporary energy storage techniques.     

Study of the initial stage of manganese dioxide electrodeposition on a rotating ring-disk electrode

The initial stage of electrodeposition of manganese dioxide has been studied on the platinum disk electrode and on the ring-disk electrode. Two current maxima were observed on the anodic voltammograms. It has been shown that the first rise in the current is associated with the formation of manganese dioxide (MD) nuclei on the electrode surface, and the second with their growth at the border between MnO₂ and bare platinum due to an increase in the perimeter of the nuclei. Electrodeposition on bare platinum proceeds at a higher rate than on the surface of growing MD. This is explained by the difference in the reaction mechanisms on these substrates. The first stage of the process on the growing MD is the chemisorption of Mn(II) ions with the formation of Mn(III) ions, which are then electrochemically oxidized to MD. Chemisorption is the slowest step in the whole process.     

Nanosized Carbon Macrocycles Based on a Planar Chiral Pseudo Meta-[2.2]Paracyclophane

Structural designs combining cycloparaphenylenes (CPPs) backbone with planar chiral [2.2]paracyclophane ([2.2]PCP) lead to optical-active chiral macrocycles with intriguing properties. X-ray crystal analysis revealed aesthetic necklace-shaped structures and size-dependent packages with long-range channels. The macrocycles exhibit unique photophysical properties with high fluorescence quantum yield of up to 82 %, and the fluorescent color varies with ring size. In addition, size-dependent chiroptical properties with moderately large CPL dissymmetry factor of 10⁻³ and CPL brightness in the range of 30–40 M⁻¹ cm⁻¹ were observed.     

Patterning catalyst via inkjet printing to grow single-walled carbon nanotubes

We demonstrated a method to pattern catalyst via inkjet printing to grow SWNTs, using metal salt solutions as the inks and an ordinary office-use printer. We printed water solutions of cobalt acetate on hydrophilic Si substrates and grew high quality SWNT films.     

Synthesis of nano‐sized magnetite mesoporous carbon for removal of Reactive Yellow dye from aqueous solutions

In this study, core‐shell structures of magnetite nanoparticles coated with CMK‐8 ordered mesoporous carbon (Fe₃O₄@SiO₂‐CMK‐8 NPs) have been successfully synthesized for the first time by carbonizing sucrose inside the pores of the Kit‐6 mesoporous silica. The nano‐sized mesoporous particles were characterized by X‐ray diffraction, Fourier transform‐infrared spectroscopy, scanning electron microscope, dynamic light scattering, vibrating‐sample magnetometer, Brunauer–Emmett–Teller (BET) and transmission electron microscopy instruments. The obtained nanocomposite was used for removal of Reactive Yellow 160 (RY 160) dye from aqueous samples. The N₂ adsorption–desorption method (at 77 K) confirmed the mesoporous structure of synthesized Fe₃O₄@SiO₂‐CMK‐8 NPs. Also, the surface area was calculated by the BET method and Langmuir plot as 276.84 m²/g and 352.32 m²/g, respectively. The surface area, volume and pore diameter of synthesized nanoparticles (NPs) were calculated from the pore size distribution curves using the Barrett–Joyner–Halenda formula (BJH). To obtain the optimum experimental variables, the effect of various experimental parameters on the dye removal efficiency was studied using Taguchi orthogonal array experimental design method. According to the experimental results, about 90.0% of RY 160 was removed from aqueous solutions at the adsorbent amount of 0.06 g, pH 3 and ionic strength = 0.05 m during 10 min. The pseudo‐second order kinetic model provided a very good fit for the RY 160 dye removal (R² = 0.999). The Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were applied to describe the equilibrium isotherms, and the Langmuir isotherm showed the best fit to data with the maximum adsorption capacity of 62.893 mg/g. Furthermore, the Fe₃O₄@SiO₂‐CMK‐8 NPs could be simply recovered by external magnet, and exhibited recyclability and reusability for a subsequent six runs.     

Facile preparation and synergy study of DMC/ZnGA composite catalyst for the synthesis of oligo (propylene‐carbonate) diols

To overcome the weak carbon dioxide (CO₂) conversion ability of Zn‐Co double metal cyanide (DMC) catalyst, zinc glutarate (ZnGA) catalyst was introduced into the DMC catalytic system and applied for the synthesis of oligo (propylene‐carbonate) diols. The DMC/ZnGA composite catalyst (mass ratio = 10:1) exhibited an excellent synergistic effect which had enhanced CO₂ activation ability, high yield and good selectivity. In copolymerization process, ZnGA catalyst not only provided activated CO₂ for DMC catalyst, but also transferred the propagating chain with more alternating structures to DMC catalyst. Both of the two effects increased the carbonate content in the final products. Overall, DMC catalyst dedicated to the polymer chain growth, while the increased CO₂ conversion mainly attributed to ZnGA catalyst. Oligo (propylene‐carbonate) diols with carbonate unit content of 45.1 mol%, Mn of 1228 g/mol, W_PC of 4.3 wt% and high yield of 1689 g/g _cat was obtained.     

Metal–Organic Framework (MOF)-Derived Carbon-Mediated Interfacial Reaction for the Synthesis of CeO2−MnO2 Catalysts

CeO₂-based catalysts are widely studied in catalysis fields. Developing one novel synthetic approach to increase the intimate contact between CeO₂ and secondary species is of particular importance for enhancing catalytic activities. Herein, an interfacial reaction between metal–organic framework (MOF)-derived carbon and KMnO₄ to synthesize CeO₂−MnO₂, in which carbon is derived from the pyrolysis of Ce-MOFs under an inert atmosphere, is described. The MOF-derived carbon is found to restrain the growth of CeO₂ crystallites under a high calcination temperature and, more importantly, intimate contact within CeO₂/C is conveyed to CeO₂/MnO₂ after the interfacial reaction; this is responsible for the high catalytic activity of CeO₂−MnO₂ towards CO oxidation.